The name of Appendix

Function

Type

Servo amplifier

Used with DKJ, DKZ etc electric actuators which request powerful control.

Because the DCS series computer system can only emit 4-20mA week electrical signal,       however the DKJ, DKZ series actuators can only be controlled by powerful electricity. So require that use the servo amplifier to amplify the 4-20mA week electrical signal to powerful electrical signal in order to fulfill the control actuator.          

If add the function of the amplifier to actuator then the actuator will become improved DKJ, DKZ series electric actuator, in this way this kind of actuator can be used without amplifier.

DFC-110 wall hangs  type Ⅱ

DFC-1100 on wall  type Ⅲ

DFC-120 break signal protection wall hangs type Ⅲ

DFC-1200 break signal protection on wall type Ⅲ

DFC-2100 packs typeⅢ

DFC-2200 packs type Ⅲ

DF-1 servo amplifier

SC-2000 servo operator

Operator

It is DKJ, DKZ etc electric actuators’ accessories, in the control-room.

There are two functions: 1. when the DCS system appear failure or when the system is overhauled, using it’s manual function to control the electric actuator at site.

2. Feedback the signal of position of valve in order to observe the opening degree of the valve at site in the control room.

Type Ⅱ (0～10mA)

Type Ⅲ (4～20mA)

DFD-05

DFD-0500

DFD-09

DFD-0900

DFD-07

DFD-0700

DFD-1300

DFD-1900

Mode

the control part of the DKJ, DKZ etc electric actuator

SM

Actuator debugger

divided into multiple function and portable type

Set type

Portable

Ball-joint

scientific name: more directions ball-joint. The link rod of   valve and the output shaft are linked with a pair of ball-joint, in order to the losses of torque is lowest.

QJ-10～QJ400

Position indicator

GAMX

Terminal box

JD-1

JD-2

JD-3

JD-5