BJ941 Electric Globe Valve

Electric globe valve is made of multi-turn electric actuator and globe valve two parts.The globe valve opening and closing is plug valve, while sealing surfaces appear flat or cone。 Its disc make linear movement along the centerline of fluid. Globe valve is used only for full open and full close, not for modulating and throttling.Globe valve is compulsory sealed valve, disc must be pressed when the valve is closed, to force the sealing surface not leak.The valve medium flow is top-down, to reduce the stem stress. When globe valve opens, the disc opening height is 25% ~ 30% of nominal diameter, flow can reach maximum.

Small working travel is small, short opening and closing time; good sealing, small friction between the sealing surface; big fluid resistance, open and close required force is bigger;not suitable for larger particles, viscosity medium. Medium flow direction shall conform to the arrow shown direction in the body. Flange electric globe valve is suitable for all kinds of piping system of nominal pressure PN16 ~ PN32MPa, working temperature 450 ℃ or less, including oil, chemical industry, hydropower and thermal power plant , cut off or connect pipe medium.

Design standard

Design and Manufacture		GB/T12235
Conncetion dimension	Face To Face	GB/T12221
Conncetion dimension	End flanged	JB/T79
Inspection and test		JB/T9092
Material	Carbon steel	GB/T12229
	Stainless Steel	GB/T12230
	Alloy Steel	Q/ZB66

Spare Parts material and usage

Body	Bonnet	Valve flap	Sealing surface	Stem	Packing	Suitable medium
WCB		WCB+D507MO	D577	2Cr13	Flexible graphite	Water, oil, steam
ZG1Cr18Ni9Ti		0Cr18Ni9Ti	Stellite6	1Cr18Ni9Ti	PTFE	Nitric acid
		Stellite12
ZG1Cr18Ni2Mo2Ti		CF8M	1Cr18Ni2Mo2Ti	1Cr18Ni2Mo2Ti	PTFE	Phosphoric acids
		Stellite12				Alkalis,Mixed acid
ZG0Cr17Ni14M02		CF3M	Stellite6	316L	PTFE	Phosphoric acids
		Stellite12				Urea, methylamine solution
ZG1Cr5MO		ZG1Cr5MO	Stellite6	25Cr2Mo1VA	Flexible graphite	Water, oil, steam
		Stellite12

Model explaination

Nominal pressure	Nominal diameter	Standard Value
PN (MPa)	DN (mm)	L	D	D1	D2	D6	b	n-φd	L1	H	Weight （kg）
1.6	50	230	160	125	100		16	4-φ18	590	645	48
	65	290	180	145	120		18	4-φ18	590	690	60
	80	310	195	160	135		20	8-φ18	590	715	65
	100	350	215	180	155		20	8-φ18	590	770	71
	125	400	245	210	185		22	8-φ18	590	780	119
	150	480	280	240	210		24	8-φ23	590	810	210
	200	600	335	295	265		26	12-φ23	810	967	320
	250	622	405	355	320		30	12-φ25	810	1143	550
	300	698	460	410	375		30	12-φ25	830	1292	785
2.5	50	230	160	125	100		20	4-φ18	590	645	50
	65	290	180	145	120		22	8-φ18	590	690	65
	80	310	195	160	135		22	8-φ18	590	715	67
	100	350	230	190	160		24	8-φ23	590	770	73
	125	400	270	220	188		28	8-φ25	590	780	127
	150	480	300	250	218		30	8-φ25	810	810	215
	200	600	360	310	278		34	12-φ25	810	967	322
	250	622	425	370	332		36	12-φ30	830	1143	585
	300	698	485	430	390		40	16-φ30	830	1292	795
4	50	230	160	125	100	88	20	4-φ18	590	645	61
	60	290	180	145	120	110	22	8-φ18	590	690	75
	80	310	195	160	135	121	22	8-φ18	590	715	84
	100	350	230	190	160	150	24	8-φ23	590	770	101
4	125	400	270	220	188	176	28	8-φ25	810	782	207
	150	480	300	250	218	204	30	8-φ25	810	875	226
	200	600	375	320	282	260	38	12-φ30	830	1160	399
6.4	50	300	175	135	105	88	26	4-φ23	590	710	64
	65	340	200	160	130	110	28	8-φ23	590	750	77
	80	380	210	170	140	121	30	8-φ23	590	785	86
	100	430	250	200	168	150	32	8-φ25	810	837	171
	125	500	295	240	202	176	36	8-φ30	810	1031	243
	150	550	340	280	240	204	38	8-φ34	830	1066	296
	200	650	405	345	300	260	44	12-φ34	830	1213	420

Parameters：

Power Supply: 380V 50Hz (for selected);

Working Environment: Environmental Temperature: -20℃~+60℃; Relative Humity:≤90（25℃）(surrounding air does not have corrosive elements);

Protection Grade: IP55;

Working Duty: Short duty, rated working time is 10 minutes.

Address : No. 11, Longhuai Road, Shuangjiang Street, Shuangyuan Economic Development Zone, Beichen District, Tianjin, China

Tel : 86-22-27553780 Fax : 86-22-27529983 E-mail : FW@bellaut.com